TH 32" EPP Crack Yak-55 LITE
- SKU:
- RCF Crack Yak Lite-BL/YE
Description
Developed with Twisted Hobbys team pilot Chris Jewett, the Crack Yak-55 Lite brings the familiar predictable handling and 3D authority of the Crack Yak into a thinner, lighter 32-inch airframe. Its reduced weight improves slow-speed control, precision, and indoor performance while retaining the resilience and repairability of EPP construction. It is an ideal step up for pilots who want a lighter, more responsive feel than the Standard Series provides and also performs well outdoors in calm conditions.
Wingspan
32 in
Length
31 in
Flying Weight
160–175 g / 5.6–6.2 oz
Construction
Engineered EPP Airframe
Power
2S LiPo
Skill Level
Intermediate
Airframe Kit
This is an airframe kit. The matched power system, receiver, battery, charger, and adhesives are sold separately. The downloadable PDF build manual is available below.
Recommended Matched Power System
The PC05 CSP includes a CSP 2203 1800KV motor, Vertex 16A ESC, one CSP-D14M servo, two CSP-D10M servos, and a GWS 8 × 4.3 Slow Fly propeller for a light, floaty 2S setup.
Build Resources and Compatible Parts
1 Review
-
TH 32" EPP Crack Yak-55 LITE
This was my first Twisted hobbies plane and i flew it for years before giving it away, Amazing flyer!
Related Products
Related Products
Power Combo CSP Laser Lite, Laser Pro
MSRP:
$155.94
$132.99
The PC05 CSP is a professionally matched power system developed for the Crack Yak Lite, Laser Lite, Crack Laser Pro, and similar lightweight EPP 3D aircraft. Every component is selected to work...
Receiver Micro 6Ch DSMX/DSM2 CRACK PRO 2.4Ghz Spectrum w/ Diversity Antenna
$29.99
The Crack Series Pro 6-channel receiver is a compact, lightweight solution for small to mid-size RC aircraft using Spektrum DSMX or legacy DSM2 transmitters. At approximately 4.1 g, it combines dual...
BEACON FOAM TAC - 1 oz Adhesive Glue - EPP Models
$10.99
Beacon Foam-Tac is the flexible, clear-drying adhesive Twisted Hobbys relies on for building and repairing EPP aircraft. Its UV-resistant formula bonds common airframe materials without foaming or...
Starbond "Super Fast Thin" CA Glue 2oz
$11.99
Starbond Super Fast Thin CA is a water-thin cyanoacrylate adhesive designed to wick deeply into close-fitting joints, hairline cracks, and porous materials. Its fast-flowing consistency reaches...
Carbon Fiber 32" Upgrade Horn Kit "LITE Series"
$36.99
Push your build to the limit!Our Crack Series Lite Carbon Fiber Upgrade Kits are built for the 32" Lite Series EPP models and work with most 7–8mm foamies. Made in the USA, these precision parts...
Prop Slow Fly GWS 8 x 4.3
$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing! GWS designed this prop with a 7mm hub diameter which...
Prop-Saver Bands "Standard Duty" (5)
$5.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers...
Prop-Saver Bands "Installation Tool"
$8.99
The Prop-Saver Band Installation Tool provides a simple, controlled way to install and remove tight prop-saver bands. Its compact design provides the leverage needed to stretch standard-duty or...
Control Throw Angle-Meter Tool
$13.99
The Twisted Hobbys Control Throw Angle-Meter provides a simple, repeatable way to measure aileron, elevator, and rudder movement during aircraft setup. Its bold, easy-to-read scale measures control...
CG Machine (center of gravity) Tool
$29.99
The Twisted Hobbys CG Machine provides a stable, repeatable way to check and adjust the center of gravity on EPP RC aircraft before flight. Set the aircraft at the CG location specified in its...