HM 32" EPP MX2 Toxic "SUPER-LITE"
- SKU:
- HM 32" MX2 Toxic Green
- MPN:
- HC1382C
Description
The Hacker Model MX2 Toxic Super Lite is a lightweight 32-inch aerobatic aircraft developed for extreme indoor 3D flying and precise slow-speed control. Its carbon-reinforced 3 mm and 5 mm EPP construction combines low weight with excellent rigidity, while the textured EPP surface helps the model remain controllable through slow descending maneuvers. Pre-hinged control surfaces and a highly prefabricated airframe simplify assembly without sacrificing the authority needed for aggressive aerobatics.
Wingspan
812 mm / 32 in
Length
825 mm / 32.5 in
Flying Weight
From 145 g / 5.1 oz
Construction
Engineered 3 mm / 5 mm EPP Airframe
Power
2S or 3S LiPo
Skill Level
Intermediate–Advanced
Airframe Kit
This is an airframe kit. The matched power system, receiver, battery, charger, and adhesives are sold separately. The downloadable PDF build manual is available below.
Recommended Matched Power Systems
Choose the lightweight PC06 for conventional indoor aerobatics and 3D flying, or the higher-output Competition system for traditional 3D and transmitter-controlled reverse-thrust 4D operation.
Important 3D / 4D Selection: The PP3-A and PP3-B servo packages are alternative ordering options; select one package when purchasing the Competition system. Use the APC 8 × 4.1 propeller for conventional 3D flight and the APC 8 × 3.7 SFR propeller with the 5 mm hub for reversible 4D operation.
Build Resources and Compatible Parts
Videos
-
MX2 - Toxic Serie
Super aerobatic model for extreme indoor aerobatic flying. Mod...
-
Hacker Model Production MX2 Toxic_Pilot Lenny (9)
Lenny rockt die MX2 - er fliegt erst seit knapp 1 Jahr und „le...
-
Twisted Hobbys/Hacker Model Toxic Super Lite MX2
Team pilot Oliver Willis flying the Twisted Hobbys/Hacker Mode...
Related Products
Related Products
Power Combo 3D/4D Competition (3 Servos)
MSRP:
$162.49
$139.99
This professionally matched three-servo competition power system is developed for performance-oriented Super Lite 3D, Cartoon, and similar lightweight EPP aircraft. It provides fast throttle...
Power Combo Super Lite Series (B)
MSRP:
$155.94
$132.99
The PC06 is a professionally matched ultra-lightweight power system developed for Twisted Hobbys indoor and Super Lite EPP aircraft. Bundle and save with a proven package that costs less than...
Receiver Micro 6Ch DSMX/DSM2 CRACK PRO 2.4Ghz Spectrum w/ Diversity Antenna
$29.99
The Crack Series Pro 6-channel receiver is a compact, lightweight solution for small to mid-size RC aircraft using Spektrum DSMX or legacy DSM2 transmitters. At approximately 4.1 g, it combines dual...
BEACON FOAM TAC - 1 oz Adhesive Glue - EPP Models
$10.99
Beacon Foam-Tac is the flexible, clear-drying adhesive Twisted Hobbys relies on for building and repairing EPP aircraft. Its UV-resistant formula bonds common airframe materials without foaming or...
Prop Slow Fly GWS 8 x 4.3
$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing! GWS designed this prop with a 7mm hub diameter which...
Prop-Saver Bands "Standard Duty" (5)
$5.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers...
Prop-Saver Bands "Installation Tool"
$8.99
The Prop-Saver Band Installation Tool provides a simple, controlled way to install and remove tight prop-saver bands. Its compact design provides the leverage needed to stretch standard-duty or...
Control Throw Angle-Meter Tool
$13.99
The Twisted Hobbys Control Throw Angle-Meter provides a simple, repeatable way to measure aileron, elevator, and rudder movement during aircraft setup. Its bold, easy-to-read scale measures control...
CG Machine (center of gravity) Tool
$29.99
The Twisted Hobbys CG Machine provides a stable, repeatable way to check and adjust the center of gravity on EPP RC aircraft before flight. Set the aircraft at the CG location specified in its...